LW-1-6/560 Wire Drawing Machine

Wire drawing Machine used to drawing the wire from 6.5mm to 2mm The material could be carbon steel,cope,alumium,alloy ect

Structure:

The equipment consists of main reduction box,die casing,wheel frame,sash brace and

electrical control system.The spinning drawing blocks are driven by JZT series motor,with gear coupling runs changeful gears to reduce speed. The drawing blocks are verticaly fixed in sealed box body.The gear pair are lubricated with oil.

Usage:

The set of the machines is an ideal equipment for drawing wire stock of high,medium and carbon steel,as well as coper,alumium and alloy.The machine are applied for drawing wire in the factories,such as wire-steel factor,metal mesh factory and nail making factory etc.

In order to lower residual heat on the surface of the block, the cooling means is installed in inter-wall of the block,the wortle is soaked in cooling water to reduce its working temperature.

The machine runs with carvel or linkage. The safety halt gear is installed by the position of operating block.

Type	LW-1-6/560
Material intensity	δb≥110kg/mm2
Max diam of material	6.5mm
Min diam of material	2mm
Diam of block	1-6/560
Max average condensation	30%
Total condensation	78-88.5%
Max.speed of block	245m/min
Total power	18.5-30kw
Weight	2000kg
Overal size	1700x1150x1750mm

LW-1-6/560 Wire Drawing Machine